搜索

Aluminum alloy door installation method and anti-corrosion treatment

Time: 2018-05-15 14:47:00

Author: Omar

Click:

Aluminum alloy door installation method and anti-corrosion treatment

Aluminum alloy door installation method and anti-corrosion treatment

In building decoration engineering, use of aluminum production of doors and Windows common despite the size of the aluminum alloy flat now open the door and the style is different, but the construction methods and aluminum alloy flat open production installation methods are the same.Today is for everybody to introduce aluminium alloy door installation method, if you just recently opened the door for installation of aluminum alloy flat and worry, then it quickly and see it!

The main ingredients of aluminum alloy flat open the door
1, the frame parts: used to frame the frame around the edge profile and other profiles doorframe.
2, open the door hardware, door handle, fastening pieces and so on.
3, door frame and wall fittings: Angle of about 2 mm thick aluminium profiles, need specific specifications of the screw.
4 open, flat glass, had better use double deck glass of 5 mm thick.


Aluminum alloy door installation method is introduced


When we are ready more materials, we can start the installation of the door, first we use line to find the rules, then process the hole of the door, found in the hole is buried under the connection after iron.At this time we will open the purchase of aluminum alloy flat to open the door and the unpacking inspection, according to the drawing number will need it in place.After we check the protective film of the aluminum alloy for pricking, and then to the installation of aluminium alloy door, around this time across the hall to fill some of the heat preservation material within the caulking and clean up the sundry.After we install hardware accessories in the aluminum alloy flat to open the door again, after install door sealing strip, if you have other needs, also can undertake the installation of the glass.It in detail, here small make up to you about the installation position of wall thickness, the best installation location is in accordance with the size and the width of the counter drawings shall prevail, if there is deviation, in principle, to appear on the window sill board size.


Aluminum alloy flat open anticorrosive processing
If the aluminum alloy flat when open the door installation using the iron to fixed, will be carried out anti-corrosive treatment, the best is the quality of a material of stainless steel connectors used.Second, aluminum alloy flat open doors on both sides of the anti-corrosion treatment should be carried out in accordance with the design requirements of the relevant, if there is no design requirement, to besmear brushs anticorrosive materials, rubber type of material and so on can be sent in.
Say so many, I believe you already know about the installation of the aluminum alloy flat open about, don't forget to install door, be sure to check whether hardware installation is linking to the aluminum alloy flat to open the door of supporting and solid, finally, if time permits, we must do the work of the wall fixed.


For more information,please contact: Omar Sui

Mail address:lianchuang@windows-china.com

Whatsapp/Phone:+86 13113010032

Wechat:suxuan325

Skype:omar.sui

QQ:240483955


copyright@2017.YY hongtaimenchuang all rights reseved

                    

添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了