Time： 2017-11-08 20:00:19
How to solve the problem of Three track sliding door system's screen
When you want to add sliding meshes for your three track sliding door system,and you want to make the sliding meshes have locks and key, it would not be a problem for your supplier, but , if you want to make the sliding meshes take only a sliding door's panel space, that may be a small problem, well check following pictures .
When the sliding meshes Stack in the left, the two sliding panels' width would be the same as the sliding panel.
When you lock all the meshes ,it should have Anti-slide function, well , here is the problem.
Check following picture:
Here we just need do some Settings,
First , you need to make screen A have buckle device with screen B.In this way, when you slide screen A from the left side, you can take screen B out together.
Second, add limit device in the end of the Screen A's end on the second screen track, so that when you slide the meshes in above picture, the Screen B can not move to right anymore, and as there is buckle device between A and B, you can not move screen B to left anymore, then you get a fixed whole meshes when Screen A is locked.
For more information,please contact: Omar Sui